SKID STEER LOADER KIT

We couple the New generation Vibrating Head and the reverse umbrella (optional) on most of the skid steer loaders (e.g. Bobcat, Caterpillar, Takeuchi, JCB, New Holland, Komatsu etc.) either wheeled or tracked drive units of at least 4 t in weight as far as they guarantee minimum specific hydraulic characteristics.

The kit uses the hydraulic circuit of the skid steer loader to which we add additional controls in the cabin.

Contact us to check the feasibility on your skid steer loader….

DOWNLOAD THE BROCHURE

TECHNICAL CHARACTERISTICS:

COUPLING: Fast release system
VIBRATING HEAD: New Generation at high frequencies, self-centring, self-braking. Double direction of the vibration motion 
MAX PLIER OPENING: Up to 55 cm
REVERSE UMBRELLA: Ø 4, 5, 6 or 7 m. Fast release system
CONTROLS: Drive unit levers with electric switch on the driver’s cabin
HYDRAULIC CIRCUIT: Open hydraulic circuit composed by vibration pump and electrohydraulic valves actuated by the hydraulic circuit of the drive unit

SIZE & WEIGHT:

TOTAL LENGTH: 2.450 mm
TOTAL WEIGHT: 1.540 kg
CASE CAPACITY: 300 kg

MINI EXCAVATOR KIT

We couple the New generation Vibrating Head on most of the mini excavators with suitable hydraulic characteristics, either wheeled or tracked drive units as far as they guarantee minimum specific hydraulic characteristics.

The kit uses the hydraulic circuit of the mini excavator to which we add additional controls in the cabin. The kit cannot be coupled with the reverse umbrella.

Contact us to check the feasibility on your Mini Excavator ….

DOWNLOAD THE BROCHURE

TECHNICAL CHARACTERISTICS:

COUPLING: Connection to the excavator’s arm through specific plates and joints
VIBRATING HEAD: New Generation at high frequencies, self-centring, self-braking. Double direction of the vibration motion 
MAX PLIER OPENING: 48 cm
CONTROLS: Drive unit levers with electric switch on the driver’s cabin
HYDRAULIC CIRCUIT: Open hydraulic circuit composed by vibration pump and electrohydraulic valves actuated by the hydraulic circuit of the drive unit

SIZE & WEIGHT:

TOTAL LENGTH: 950 mm (head) + 300 mm (connection plate)
TOTAL HEIGHT : 400 mm
TOTAL WEIGHT: 560 kg (T212, connection plates and hydraulic circuit)
VERTICAL BALANCING: 45°