SELF MOVING VIBRATOR FOR OLIVES "F3"

SELF MOVING VIBRATOR FOR OLIVES "F3"

Click on the photo to zoom

SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"
SELF MOVING VIBRATOR FOR OLIVES "F3"

The product is nοt available for online order. Please get in touch with us.

Add to my favorite products

Product description:

 

F3

The self-propelled F3 is the Sicma’s top harvester, available with 2 engines, 90 or 103 kW FPT (Fiat Powertrain Technologies) engines, both Stage V. It is characterized by the independent 3-wheel drive and the rear steering wheel.

The F3 harvests indifferently olives, nuts (i.e. walnuts, almonds, pecans, macadamia, etc.), sour cherries and other hanging fruits. It works in different growing conditions, either on flat or sloping grounds, exploiting the power of the engine and the exclusive handling of the 3-wheel system which allows high maneuverability, even in reduced spaces.

The F3 is approved by the Italian Ministry of Transport and Navigation and falls within the requirements for the Industry 4.0 incentives.

The F3 can be equipped with standard, overturning or telescopic arm with double extension (triplex arm), other than the standard or balancing reverse umbrella, hydraulic lever distributor, electro-hydraulic joystick, rear camera with monitor in the cabin, etc. Once harvest is complete, the drive unit of the F3 can be coupled with different devices, for instance pruning bars for hedging & topping, forks, etc ……………….

 Configure yours now !!!

 

DOWNLOAD THE BROCHURE


Technical Characteristics of F3 125 and F3 140:

 

TECHNICAL CHARACTERISTICS

 

F3 125

F3 140

ENGINE

Diesel,  FPT (Fiat Powertrain Technologies) F36, (4 cylinders),  Stage V, 3.660 cm – 90 kW @ 2.300 rpm

Diesel, FPT (Fiat Powertrain Technologies) N45, (4 cylinders), Stage V,  4.500 cm3 – 103 kW @ 2.220 rpm

CHASSIS

Monoblock in tubulars and sheets. Open cabin and roll-bars

TRANSMISSION

Hydrostatic, independent 3-wheel drive. The rear wheel steers

CONTROLS

Steering wheel, motion pedal and vibration joystick. Service hydraulic lever distributor

VIBRATING HEAD

New Generation at high frequencies, self-centring, self-braking. Two vibrating speeds

PLIER OPENING

60 cm

65 cm

TIRES

405 x 70 – 20”

Front 440 65 R24” – Rear 440 65 R20”

 

SIZE & WEIGHT

 

F3 125

F3 140

TOTAL LENGTH

5.500 mm and 7.700 with telescopic arm overturned or retracted, respectively

MAX WIDTH

2.280 mm (without reverse umbrella)

CASE CAPACITY (IF EQUIPPED WITH UMBRELLA)

400 kg

UMBRELLA DIAMETER

Ø 5, 6, 7, 8, or 9 m

MAX RECOMMENDED UNLOADING HEIGHT

2.250 mm

HYDRAULIC EXTENSION OF THE ARM

1.000 mm (+1.000 mm with triplex arm)

TOTAL WEIGHT (WITHOUT/WITH REVERSE UMBRELLA)

5.415 kg/6.150 kg

5.980 kg/6.730 kg

         

 

OPTIONAL:

  • Closure pressure jaw valve
  • Electro-hydraulic joystick
  • Triplex arm double extension
  • Hydraulic balancing reverse umbrella (with cylinders)
  • Umbrella bar extensions


Other products that might interest you in this category