Filtomat M100-1500 Serie - Pistonless Model

Filtomat M100-1500 Serie - Pistonless Model

Click on the photo to zoom

Filtomat M100-1500 Serie - Pistonless Model
Filtomat M100-1500 Serie - Pistonless Model
Filtomat M100-1500 Serie - Pistonless Model

The product is nοt available for online order. Please get in touch with us.

Add to my favorite products

Product description:

Water is filtered through the fine screen to the outlet. The filtration cake is accumulated on the inner surface of the fine screen causing pressure differential to build up.

Filtering process:
Water is filtered through the fine screen to the outlet. The filtration cake is accumulated on the inner surface of the fine screen causing pressure differential to build up.

Self-cleaning process:
The M100 pistonless filters will start the self-cleaning process when the pressure differential across the screen reaches a preset level. The rinse controller opens the flushing valve creating a strong backflush stream to atmosphere. This backflush creates a suction effect at the nozzles, cleaning the face of the fine screen directly in front of the nozzle openings. Backflush water then flows through a collector pipe via a hydraulic rotor to the flushing valve, causing the dirt collector assembly to spin. Pressure drop in the rotor chamber forces the collector assembly upward. The combined spin and upward movements ensure that the suction nozzles sweep the entire screen area.

When flushing is completed, a second flushing cycle is triggered, pushing the collector assembly downward to its original position. The combined flush cycle takes 6 - 10 seconds.

Technical specifications

 

General data:

Maximum flow rate

350USgpm; 80m³/h

Consult manufacturer For optimum flow,
depending on filtration degree & water quality.

Minimum working pressure

30psi; 2 bar

Pressure requirements depend on multiple factors. Please consult manufacturer.

Maximum working pressure

150psi; 10bar

 

Filter area

Weave wire screen: 232.5in²; 1500cm²

 

Inlet/Outlet diameter

3", 4"; 80, 100mm

 

Maximum temperature

131°F; 55°C

 

Weight (Empty)

3"=66lb, 4"=77lb
80mm=30kg, 100mm=35kg

 

 

Flushing data:

Exhaust valve

1.5"; 40mm

 

Flushing cycle time

10 seconds

 

Wasted water per cycle

5 USgal; 20lit

 

Minimum flow For flushing

88USgpm; 20m³/h

 

 

Control and electricity:

Optional control voltage

9V DC, or 110/220V AC

 

 

Construction materials:

Filter housing

Epoxy-coated carbon Steel 37-2

Also available in Stainless Steel 316

Lid

High density polypropylene

 

Screen

Weave wire: St.St. 316

 

Cleaning mechanism (internals)

PVC and Stainless Steel 316L

 

Exhaust valve

Plastic

 

Seals

BUNA-N

 

 

Standard filtration degrees:

Weave Wire screen: 500, 300, 200, 130, 100, 80 micron